PRODUCTS
Ball valves "wafer type" full bore
TYPE 117/118 FB
ANSI 150
| Suitable for use in industrial chemical complexes, for gas and water distribution and food industry | ||
| Body material from bar (A 105 or AISI 316) | ||
| Thread ball body-cover | ||
| Flanges drilled acc.to ANSI | ||
| Possibility of equipment with handlever, manual gear, pneumatic or electric actuator (on request) | ||
| Control equipment connection according to ISO 5211 | ||
| On request, possibility of special executions with the employment of different materials | ||
| Antistatic device | ||
| Installation: flanged pipework systems | ||
| Direction of flow: in the two ways | ||
| DN | Ø" | E (mm) | L (mm) | D (mm) | LK (mm) | P (mm) | H1 (mm) | H (mm) | T (mm) | F (mm) | T1 (mm) | Weight Kg. | ISO 5211 | |
| 15 | 1/2 | 14 | 40 | 90 | 60,3 | 33 | 51 | 68 | 153 | 10 | 7 | 1,5 | F03 | |
| 20 | 3/4 | 20 | 40 | 100 | 69,8 | 41,5 | 64 | 78 | 185 | 10 | 7 | 2 | F04 | |
| 25 | 1 | 25 | 50 | 110 | 79,4 | 45 | 69 | 84 | 185 | 10 | 7 | 3,1 | F04-M6 | |
| 32 | 1 ¼ | 32 | 55 | 120 | 88,9 | 55 | 86 | 121 | 253 | 14 | 9 | 4,8 | F05 | |
| 40 | 1 ½ | 38 | 65 | 127 | 98,4 | 59 | 90 | 125 | 253 | 14 | 9 | 6,7 | F05 | |
| 50 | 2 | 49 | 80 | 150 | 120,6 | 69 | 101 | 126 | 280 | 16 | 10 | 7/9,2 | F07 | |
| 65 | 2 ½ | 65 | 108 | 180 | 139,7 | 84 | 126 | 150 | 380 | 20 | 14 | 11/17 | F07 | |
| 80 | 3 | 73 | 118 | 200 | 152,4 | 95 | 132 | 158 | 380 | 20 | 14 | 14/23 | F07 | |
| 100 | 4 | 96 | 152 | 220 | 190,5 | 125 | 165 | 178 | 455 | 30 | 18 | 23/32 | F10 | |
| 125 | 5 | 120 | 175 | 250 | 215,9 | 140 | 180 | 193 | 455 | 30 | 18 | 31,5/47 | F10 |
MATERIALS
| Descrizione/Description | MAT 117 | MAT 118 |
| 1 - Corpo / Body | A 105 | AISI 316 |
| 2 - Sfera / Ball | F6 | AISI 316 |
| 3 - Ghiera / Ring Nut | A 105 | AISI 316 |
| 4 - Sedi Integrali / Hygienic Seat | PTFE | PTFE |
| 4a - Sedi / Seat | PTFE/DELRIN | PTFE/DELRIN |
| 5 - Stelo / Stem | AISI 316 | AISI 316 |
| 6 - Molle a Tazza / Spring Washers | ACC/STEEL | ACC/STEEL |
| 7 - Fermo / Stop | A 105 | AISI |
| 8 - Guarnizione / Seal | PTFE | PTFE |
| 9 - Dado-Controdado / Nut-Lock Nut | ACC/STEEL | ACC/STEEL |
| 10 - Premistoppa / Pressing Bush | A 105 | AISI |
| 11 - Leva / Wrench | A 105 | A 105 |
| 12 - Anello / Ring | PTFE | PTFE |
| 13 - Guarnizione a Pacco / Bellows Seals | PTFE/GRAPH. | PTFE/GRAPH. |
| 14 - Dispositivo Antistatico / Antistatic Device | AISI | AISI |
Those weights reported in the table are respectively casting/bar-weight (up to 40 ND only bar)
